Silicone Rubber Cold Shrink Tubing Supplier in China

Leading China Maufacturer: HarshMet Corporation

HarshMet Cold Shrink Tubing Supplier in China

Any question please contact: coldshrinktube@yahoo.com

For more details welcome to visit our homepage: www.harshmet.com

CAS Series

Description

CAS series provide the correct Cold Shrink tubing or the correct Cold Shrink tubing and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent. 

Applications

The main application of cold shrink tubing is the sealing of coax connectors used in the wireless communication antenna market. These mainlyoutside installed connectors require an extra sealing. 

Technical Information

The outer Cold Shrink tubing is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube. The kits meet water sealing standard IP67, IP68.

Selection Table

Part#

Supported Coax Sizes

Material

Shrunk Length of Cold Shrink Rubber Tubing

Foam Strip

CAS11

½" antenna connector

or ½" to ½" splice

Silicone Rubber

203mm(Standard)

No foam strip required

150mm

178mm

300mm

CAS21

½" to 7/8" splice

5/8" to 7/8" splice

EPDM Rubber

254mm( Standard)

1 Pc

230mm

220mm

210mm

203mm

….

CAS31

½" to 1 1/4" or 1 5/8" splice

5/8" to 1 1/4" or 1 5/8" splice

EPDM Rubber

330(standard)

1 Pc

280mm

305mm

…..

CAS41

1/2”-1/2”, 1/2”-Antenna/RRU(N Connector Only)

Silicone Rubber

125mm(Standard)

No foam strip required

150mm

178mm

203mm

….

Any question please feel free to contact: coldshrinktube@yahoo.com

For more details welcome to our homepage: www.harshmet.com

Cold Shrink Tubing Manufacturer in China

Cold Shrink Tubing Manufacturer in China

Website: www.harshmet.com

Email: coldshrinktube@yahoo.com

Description

CST12 series provide the correct Cold Shrink tube or the correct Cold Shrink tube and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent. 
Applications

The main application is the sealing of coax connectors used in the wireless communication antenna market. These mainly outside installed connectors require an extra sealing. 

Technical Information

The outer Cold Shrink tube is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube.

Selection Table

Part#	Supported Coax Sizes	Material	Application Range	Connectors Type
CST12D	1/2” Jumper Cable to Antenna Connections, 1/2” Cable to 1/2” Cable Connections	Silicone Rubber / EPDM Rubber	13 - 39	7/16 DIN, N type & Mini Din 4.3-10 & 4.1-9.5
CST12MD	1/2” Jumper Cable to Antenna Connections, 1/2” Cable to 1/2” Cable Connection	Silicone Rubber/ EPDM Rubber	13-27	Mini Din 4.3-10 & 4.1-9.5
CST1278MN	½" Jumper Cable to 7/8" Feeder Cable Connection,  5/8"Cable  to 7/8" Cable Connections	EPDM Rubber	13-49	7/16 DIN & N Type
CST12158MN	1/2” Jumper Cable to 1-1/4” or 1-5/8” Feeder Cable Connections 5/8” Jumper Cable to 1-1/4” or 1-5/8” Feeder Cable Connections	EPDM Rubber	13-67.8	7/16 DIN & N Type

Typical Properties(Mechanical & Electrical)

EPDM Rubber

Properties	Typical Data	Test Method
300% Modulus	4.7Mpa	ASTM D 412-75
Ultimate Tensile Strength	11.8 MPa	ASTM D 412-75
Utimate Elongation	750%	ASTM D 412-75
Tear Strength	38.6N/mm	ASTM D624C-73
Dielectric Strength	19.1KV/mm	ASTM D149-75
Moisture Absorption	Weight gain 1.8%	7 days, 90°C, H₂O
UV Resistance	2,000hrs, UVB-313 fluorescent lamp, exposure	ASTM G-53

Typical Properties(Mechanical & Electrical)  

Silicone Rubber

Properties	Typical Data	Test Method
Hardness	49 Shore A	ASTM D2240
Tensile Strength	11.8 MPa	ASTM D 412-75
Elongation at Break	641%	ASTM D 412-75
Tear Strength	38.6N/mm	ASTM D624B
Dielectric Strength	19.1KV/mm	ASTM D149
Specific Gravity	1.23	/

Gel Seal Weatherproofing Clamshell Manufacturer in China

HGS Series Gel Seal Weatherproofing Clamshell Manufacturer in China

for Coaxial Cables, Antenna or RRU RF Interfaces

Description

HarshMet HGS series gel closure is a weatherproofing system for sealing coaxial cable jumper-to-feeder, jumper-to-antenna, jumper-to-RRU, and jumper-to-TMA connectors exposed to the outside environment. The housing contains an innovative gel material and provides an efficient moisture block eff ectively water-proofing the connectors. HGS series closures are re-enterable, reusable and tool-less, making it time-saving, cost-effective and installer-friendly weatherproofing solution for the mobile base stations industry.The ease of installation and the long term protection makes it a reliable and cost eff ective sealing solution for outside plant cables and connectors

Benefits/Features

Sealing properties of the gel provide a reliable protection over a wide temperature range (-40°C/+ 70°C)

Wraparound and no disconnection of the connector

Quick and easy to install

Easy removable and re-usable

Gel material provides an effective barrier against ingress of water and other contaminant's - IP rating 68 Acc IEC/EN 60529

No tape, no mastics or tools required for installation and removal

Selection Table

Part Number	RF Coax Connections Protected	Connector Type	Design
HGS-12A	1/2”& 1/2”Superflex Jumper to Antenna /RRU Connections	7/16 DIN	Long Large Version
HGS-12AS	1/2”& 1/2”Superflex Jumper to Antenna /RRU Connections	7/16 DIN	Short Small Version
HGS-1043	1/2”& 1/2”Superflex Jumper to Antenna /RRU Connections	4.3-10/4.1-9.5 Mini Din	Slim Version
HGS-12TD-RRU	1/2”Superflex Jumper to Antenna /RRU Connections	N Type	Slim Version
HGS-38TD-RRU	3/8”Superflex Jumper to Antenna /RRU Connections	N type	Slim Version
HGS-78A	7/8”& 7/8”Superflex Jumper to Antenna /RRU Connections	7/16 DIN	/
HGS-1278	1/2”& 1/2”Superflex Jumper to 7/8”& 7/8”Superflex Feeder Connections	7/16 DIN or N Type	/
HGS-12114	1/2”& 1/2”Superflex Jumper to 1-1/4”& 1-1/4”Superflex Feeder Connections	7/16 DIN or N Type	/
HGS-12158	1/2”& 1/2”Superflex Jumper to 1-5/8”& 1-5/8”Superflex Feeder Connections	7/16 DIN or N Type	/
HGS-78G	7/8” & 7/8”Superflex Grounding Transitions	/	/
HGS-12G	1/2” & 1/2”Superflex Grounding Transitions	/	/

Manufacturers Cross Reference 

HarshMet P/N (HarshSeal HGS)	Eupen (Eucaseal)	TE(Tyco) P/N (GSIC)	3M P/N (OSCW, SLC)
HGS-12A	ES-12-BOX	GSIC-1/2-ANT-L (D80635-000)	OSCW Series-OSCW-J-1/2 Slim Lock Family- SLC-716
HGS-12AS	ES-12-BOX	GSIC-1/2-ANT-S (F58329-000)
HGS-1043	/	/	Slim Lock Family- SLC-A-MINI
HGS-1278	ES-12-78	GSIC-1/2-7/8 (D32473-000)	OSCW Series-OSCW-F-7/8
HGS-12114	ES-12-114	GSIC-1/2-1 1/4 (C79091-000)	/
HGS-12158	ES-12-158	GSIC-1/2-1 5/8 (E97072-000)	/
HGS-12TD-RRU	/	/	Slim Lock Family-SLC-B-NANO
HGS-12G	/	/	/
HGS-78G	/	FAST-GGND-0078	/
HGS-38TD-RRU	/	/	/
HGS-78A	/	/	/
	/	/

Customer Service

HarshMet Corporation

--Telecom Business

HarshMet Material Solutions Ltd

汉氏特种材料解决方案有限公司

WEB: http://www.harshmet.com 

 EMAIL: 

           For businesses 

               Please contact us at coldshrinktube@yahoo.com