Leading China Maufacturer: HarshMet Corporation
HarshMet Cold Shrink Tubing Supplier in China
Any question please contact: coldshrinktube@yahoo.com
For more details welcome to visit our homepage: www.harshmet.com
CAS Series
Description
CAS series provide the correct Cold Shrink tubing or the correct Cold Shrink tubing and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent.
Applications
The main application of cold shrink tubing is the sealing of coax connectors used in the wireless communication antenna market. These mainlyoutside installed connectors require an extra sealing.
Technical Information
The outer Cold Shrink tubing is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube. The kits meet water sealing standard IP67, IP68.
Selection Table
Part#
Supported Coax Sizes
Material
Shrunk Length of Cold Shrink Rubber Tubing
Foam Strip
CAS11
½" antenna connector
or ½" to ½" splice
Silicone Rubber
203mm(Standard)
No foam strip required
150mm
178mm
300mm
CAS21
½" to 7/8" splice
5/8" to 7/8" splice
EPDM Rubber
254mm( Standard)
1 Pc
230mm
220mm
210mm
203mm
….
CAS31
½" to 1 1/4" or 1 5/8" splice
5/8" to 1 1/4" or 1 5/8" splice
EPDM Rubber
330(standard)
1 Pc
280mm
305mm
…..
CAS41
1/2”-1/2”, 1/2”-Antenna/RRU(N Connector Only)
Silicone Rubber
125mm(Standard)
No foam strip required
150mm
178mm
203mm
….
Any question please feel free to contact: coldshrinktube@yahoo.com
For more details welcome to our homepage: www.harshmet.com
没有评论:
发表评论