Silicone Rubber Cold Shrink Tube Manufacturer in China

Leading China Maufacturer: HarshMet Corporation

HarshMet Cold Shrink Tube

Any question please contact: coldshrinktube@yahoo.com

For more details welcome to visit our homepage: www.harshmet.com

CAS Series

Description

CAS series provide the correct Cold Shrink tubing or the correct Cold Shrink tubing and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent. 

Applications

The main application of cold shrink tubing is the sealing of coax connectors used in the wireless communication antenna market. These mainlyoutside installed connectors require an extra sealing. 

Technical Information

The outer Cold Shrink tubing is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube. The kits meet water sealing standard IP67, IP68.

Selection Table

Part#

Supported Coax Sizes

Material

Shrunk Length of Cold Shrink Rubber Tubing

Foam Strip

CAS11

½" antenna connector

or ½" to ½" splice

Silicone Rubber

203mm(Standard)

No foam strip required

150mm

178mm

300mm

CAS21

½" to 7/8" splice

5/8" to 7/8" splice

EPDM Rubber

254mm( Standard)

1 Pc

230mm

220mm

210mm

203mm

….

CAS31

½" to 1 1/4" or 1 5/8" splice

5/8" to 1 1/4" or 1 5/8" splice

EPDM Rubber

330(standard)

1 Pc

280mm

305mm

…..

CAS41

1/2”-1/2”, 1/2”-Antenna/RRU(N Connector Only)

Silicone Rubber

125mm(Standard)

No foam strip required

150mm

178mm

203mm

….

Any question please feel free to contact: coldshrinktube@yahoo.com

For more details welcome to our homepage: www.harshmet.com