HarshMet
- RF Feeder Line Grounding Solutions for Wireless Sites
HarshGroundTM Grounding Kits
Clip-on Grounding Kit
Description
HarshMet Clip-on ground kits are an advanced type for coaxial cable grounding, providing an easy installation as well as dependable protection of coaxial cable system. The designed clip design and pre-formed strap allow the clip-on ground kits to be easily slipped over the coaxial cable’s outer conductor.
The latch was optimized to provide a secure fix maximizing performance by ensuring proper contact surface area and pressure
HCG Clip-on Grounding Kits
Clip-on Type
Model: HCG-XX-X*XM(HG-1-5/8”-0.8M)
Grounding Wire: 16mm2 (AWG6) or 25mm2 BV or BVR copper wire
Grounding Wire Length: 0.6, 0.8, 1.0, 1.5M
Compatibility , 1/2”, 7/8”, 1-1/4”, 1-5/8” , 2-1/4” Corrugated Coax Cable
HCG-T Clip-on Grounding Kits
(Tinned Clamp)
Clip-on Type
Model: HCG-T-XX-X*XM(HGT-1-5/8”-0.8M)
Grounding Wire: 16mm2 (AWG6) or 25mm2 BV or BVR copper wire
Grounding Wire Length: 0.6, 0.8, 1.0, 1.5M
Compatibility , 1/2”, 7/8”, 1-1/4”, 1-5/8” , 2-1/4” Corrugated Coax Cable
Note, Weatherproofing kits are available on your request,
PVC tape size: 0.19MM×50M×6M
Butyl rubber tape Size: 1.5MM×60MM×0.6M
Copper lugs, one or two holes on request
Universal Grounding Kits
Description
HarshMet Universal type grounding kit is a original designed grounding kit. With pre-formed copper strap & copper lugs, installation of this type grounding kit is soon & simple.
HUG Univeral Grounding Kits
Model: HUG-XX-X*XM(HCTG-7/8”-0.8M)
Grounding Wire: 16mm2 (AWG6) or 25mm2 BV or BVR copper wire
Grounding Wire Length: 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5M
Tape Size: 1.5MM×60MM×0.6M**
Compatibility, 3/8”-3” Cable
HUG-T Universal Tinned Grounding Kits
Universal Type
Model:HUG-T-XX-X*XM(HGKU-383-0.9M)
Grounding Wire: 16mm2 (AWG6) or 25mm2 BV or BVR copper wire
Grounding Wire Length: 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5M
Compatibility, 3/8”-3” Cable
PVC tape size: 0.19MM×50M×6M
Butyl rubber tape Size: 1.5MM×60MM×0.6M
CR Series Universal Grounding Kits
Universal Type
Model
CR-1/2”-XM
Grounding wire: 16mm2 (AWG 6)
Grounding wire length: as requested
Braided copper mesh band length: up to 1.5m(3” cable) and 2.8m(for 5-1/2” cable)
Compatibility, 1/2” to 5-1/2” for both RF feeder and broadcast
Framework Grounding Kits
Description
HarshMet Framework / high speed type grounding kit is compact design for outdoor coaxial cables’s (corrugated or braid) grounding. With Tinned copper strip & butyl seal, framework type grounding kit offers Quick installation, good waterproofing & cost efficiency.
HFG High Speed Framework Grounding Kits
Framework Type(Spring Piece)
Model: HFG-XX-X*XM(HFG-1-5/8”-0.8M)
Grounding Wire: 16mm2 (AWG6) or 25mm2 BV or BVR copper wire
Grounding Wire Length: 0.6, 0.8, 1.0, 1.5M
Compatibility : 1/4”, 1/2”, 7/8”, 1-1/4”, 1-5/8” , 2-1/4” Braid or Corrugated Coax Cable
No extra tape or butyl needed
Gelmel Grounding Kits
Description
Harshmet gelmel type grounding kit is a new designed for reliable outdoor grounding of today’s usual corrugated coaxial cable and RG cables. With compact design & high quality material, gemel type grounding kit offers Quick and easy installation, No loose piece parts, Corrosion resistant & reusable.
HGG Gemel Grounding Kits
Gemel Type
Model: HGG-XX-X*XM(HGG-1/4”-0.8M)\
Grounding Wire: AWG 6 Copper Grounding Wire
Grounding Wire Length: 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5M
Metal material:304 Stainless Steel
Grounding piece: Rimple Conductor
Compatibility: RG 223, RG58, LMR 240, CNT200 (5-6mm), RG 59, Belden 9248, LMR 300, CBT300 (7-8mm), 1/4” (8-9mm), 1/4”-3/8” Superflex,RG 8 / U, RG213, RG214, LMR400, Belden 9913 (10-11mm),3/8” (12-13mm), 1/2” Superflex (13-14mm), 1/2”(17mm), 7/8”- 7/8” Superflex (26-28mm), 1-1/4” (39-40mm), 1-5/8” (50-52mm)
Standard Grounding Kit
Standard Type
HSG Standard Grounding Kits
Applied with 1/4 in and 3/8 in corrugated & braided coaxial cable, or for Also for elliptical waveguide 240 and 380
Factory attached one-hole lug
Fast and easy installation
Indoor Grounding Kit
Description
HarshMet Indoor type grounding is used for indoor coaxial cable grounding,composed with C copper terminal, stainless steel clamp, colored grounding cable
Nominal impluse discharge current, 70KA
Insulation resistance, 500MΩ
Contact resistance, ≤1mΩ
Grounding wire length, according to customer requirements
Inner contact material, High quality copper
Waterproofing, IP68
Grounding Wire
Specifications
Item
|
Type
|
Length
|
Grounding wire（BV）
|
1 meter-BV16mm2
|
As per request
|
Grounding wire（BVR）
|
1 meter-BV16mm2
|
As per request
|
Grounding wire（BV）
|
1 meter-BV25mm2
|
As per request
|
Grounding wire（BVR）
|
1 meter-BV25mm2
|
As per request
|
Grounding wire（BV）
|
1 meter-BV35mm2
|
As per request
|
Grounding wire（BVR）
|
1 meter-BV35mm2
|
As per request
|
Grounding wire（BV）
|
1 meter-BV70mm2
|
As per request
|
Grounding wire（BVR）
|
1 meter-BV95mm2
|
As per request
|
Grounding Bar
Available Materials: T2 red copper
tin-plated or HP59-1 Brass tin-plated
Available Sizes
10 mm *100 mm *600 mm*23 holes
|
8 mm *80 mm *600 mm*15holes
|
10 mm*100 mm*500 mm*25 holes
|
8 mm*80 mm*500 mm*15 holes
|
10 mm *100 mm *400 mm, without holes
|
10 mm *100 mm *400 mm*21 holes
|
10 mm *100 mm *400 mm*14 holes
|
8 mm *80mm*400 mm*16 holes
|
8 mm *100 mm *400 mm*23 holes
|
5 mm *100 mm *400 mm*11 holes
|
6 mm *80 mm*400 mm*16 holes
|
10 mm *80 mm *300 mm*21 holes
|
6 mm *150 mm *300 mm*21 holes
|
6 mm *80mm*300 mm*16 holes
|
8 mm *100 mm *350mm*16 holes
|
6 mm *60 mm *300mm811 holes
|
6 mm *100 mm *300mm*16 holes
|
Customer Service
HarshMet Corporation
--Telecom Business
HarshMet Material Solutions Ltd
汉氏特种材料解决方案有限公司
EMAIL:
For businesses
Please contact us at coldshrinktube@yahoo.com
没有评论:
发表评论