Weatherproofing Rubber Boots

China Manufacturer : HarshMet Corporation 

Email: coldshrinktube@yahoo.com

Website: www.harshmet.com

HarshMet A Better Solution 

New Generation Weatherproofing Solutions 

WeatherGuardTM

RF Jumper Weatherproofing Boots

- Smarter, Slimmer, smaller, lighter, Easier

HarshMet WeatherGuardTM WPB-12A-716 & WPB-12A-4310 factory installed RF jumper weatherproofing system is a kind of new and innovative weatherproofing solution for wireless infrastructure market. WPB-12A-716 & WPB-12A-4310 is developed to protect the critical RF path components in the harshest environments. This solution is quicker, easier, and more cost-effective than traditional weatherproofing solutions like tapes, pre-expanded shrink tubing and clamshell enclosures. This boot helps clients save time and money.

As antennas become more densely populated with RF connectors as a result of Multiple In Multiple Out (MIMO) antenna requirements or LTE and the trend toward multi-band multi-service antennas, weatherproofing becomes challenging and time consuming. Due to its space-saving compact design, the HarshMet WPB-12A-716 & WPB-12A-4310 boot perfectly solves the installation challenges nowadays.

Features and Benefits

Easier Installation

No special tools required

Reusable and re-enterable

Wide temperature range and UV stable

Sealing class, IP68 acc IEC/EN 60529

1/2" Snap-in Hangers

HarshMet

Site Installation Solutions

SSH Series Stackable Snap-in Hanger Kits

Description

Stainless Steel Construction

Compact Solution for Supporting Coaxial Cable

Up to 3 Runs of Cable

Patented Design

Part Number	Cable Range
SSH-12	1/2”
SSH-78	7/8”
SSH-114	1-1/4”
SSH-158	1-5/8”

USH Series Universal Snap-in Hanger Kits

Description

Manufactured from 304 Stainless Steel
Special installation tool not required
Internal support fingers absorb tower vibration

Part Number	Cable Range
USH-12	1/2”
USH-58	5/8”
USH-78	7/8’
USH-114	1-1/4’
USH-158	1-5/8”

Customer Service

HarshMet Corporation

--Telecom Business

HarshMet Material Solutions Ltd

汉氏特种材料解决方案有限公司

WEB: http://www.harshmet.com 

 EMAIL: 

           For businesses 

               Please contact us at  eric@harshmet.com

             For any suggestions or dissatisfaction with our services 

             Please contact us at suggestion@harshmet.com 

Standard Butterfly Hanger Kit W/Hardware for 1-1/4 Coaxial Cable

HarshMet

Site Installation Solutions

HBH Series Butterfly Hanger Kits

     

         

Description

The proven design of the Butterfly Hanger provides a versatile means for securing individual transmission lines with your wireless system. Corrosion resistance stainless steel construction ensures long-term integrity in extreme weather applications. A stainless steel clip insert provides additional support and prevents damage from occurring by isolating smaller diameter lines from the hanger mounting hardware. Integrated cable grippers bite into the jacketing to provide additional support in heavy wind and ice loading conditions. Captivated 1/4” stainless steel hardware allows the user to quickly tighten this hanger without fumbling or dropping hardware during installation. Butterfly Hanger kits come with (10) 3/8” x 3/4” long stainless steel slotted hex head bolts, stainless steel washers and stainless steel nuts

P/N	Description
HBH-12	Butterfly Hanger for 1/2” Diameter Cable with 3/8” Mounting Hole. Includes hardware.
HBH-78	Butterfly Hanger for 7/8” Diameter Cable with 3/8” Mounting Hole. Includes hardware.
HBH-114	Butterfly Hanger for 1-1/4” Diameter Cable with 3/8” Mounting Hole. Includes hardware.
HBH-158	Butterfly Hanger for 1-5/8” Diameter Cable with 3/8” Mounting Hole. Includes hardware.
HBH-214	Butterfly Hanger for 2-1/4” Diameter Cable with 3/8” Mounting Hole. Includes hardware.

Customer Care

Manufacturer. HarshMet Corporation

Website www.harshmet.com

Email eric@harshmet.com

Weatherproofing Rubber Boots for RF Jumper 7/16 DIN Or 4.3/10 Mini Din Connectors

China Manufacturer : HarshMet Corporation 

Email: coldshrinktube@yahoo.com

Website: www.harshmet.com

HarshMet A Better Solution 

New Generation Weatherproofing Solutions 

WeatherGuardTM

RF Jumper Weatherproofing Boots

- Smarter, Slimmer, smaller, lighter, Easier

HarshMet WeatherGuardTM WPB-12A-716 & WPB-12A-4310 factory installed RF jumper weatherproofing system is a kind of new and innovative weatherproofing solution for wireless infrastructure market. WPB-12A-716 & WPB-12A-4310 is developed to protect the critical RF path components in the harshest environments. This solution is quicker, easier, and more cost-effective than traditional weatherproofing solutions like tapes, pre-expanded shrink tubing and clamshell enclosures. This boot helps clients save time and money.

As antennas become more densely populated with RF connectors as a result of Multiple In Multiple Out (MIMO) antenna requirements or LTE and the trend toward multi-band multi-service antennas, weatherproofing becomes challenging and time consuming. Due to its space-saving compact design, the HarshMet WPB-12A-716 & WPB-12A-4310 boot perfectly solves the installation challenges nowadays.

Features and Benefits

Easier Installation

No special tools required

Reusable and re-enterable

Wide temperature range and UV stable

Sealing class, IP68 acc IEC/EN 60529

Lace-up hoisting grip Supplier in China

HarshMet 

Site Installation Solutions

Lace-up Open Weave Hoisting Grips Supplier in China

Description

HarshMet Lace-up hoisting grips provide an effective method for hoisting coaxial and elliptical waveguide hybrid (FiberFeed, Hybriflex) or fiber cable into position and can be utilized to provide additional support in location. The lace-up design allows the hoisting grip to be attached even when the run has been connectorized and facilitates easy positioning at 200 (61m) increments on long coax runs.

Characteristic

Application, coaxial support

Made of 304 stainless steel wire or tinned bronze

Sizes 1/4” to 2-1/4”

Open mesh with single eye support

Number of cables, 1 cable

Part Number	Description
HG-14-L	Lace-up hoisting grip for 1/4” cable, min dia 6mm
HG-38-L	Lace-up hoisting grip for 3/8” cable, min dia 8.38mm
HG-12-L	Lace-up hoisting grip for 1/2” cable, min dia 12.7mm
HG-58-L	Lace-up hoisting grip for 5/8” cable, min dia 19mm
HG-78-L	Lace-up hoisting grip for 7/8” cable, min dia 25.4mm
HG-114-L	Lace-up hoisting grip for 1-1/4” cable, min dia 31.75mm
HG-158-L	Lace-up hoisting grip for 1-5/8” cable, min dia 45mm
HG-214-L	Lace-up hoisting grip for 2-1/4” cable, min dia 50mm
HG-3-L	Lace-up hoisting grip for 3” cable
HG-4-L	Lace-up hoisting grip for 4” cable
HG-5-L	Lace-up hoisting grip for 5” cable
.........	......

Pre-laced Close Weave Hoisting Grips

Description

HarshMet pre-laced hoisting grips is type of hoisting grips with closed weave design which simplifies the installation than traditional open weave, lace-up type grips.

The closed weave design allows the hoisting grips slip over a un-terminated end of cable of coaxial cable,elliptical waveguide,hybrid (FiberFeed,Hybriflex) or fiber cable...

The grip securely tightens being pulled,and offer a effective method to hoist the cable in position and can provide support once the cable in place.

Our pre-laced hoisting grips include a support clamp to provide additional support both during and after installation.Characteristic

Made of stainless steel 304 wire

Additional support clamp provide additional support

Pre-laced (close weave) hoisting grips

For cable type Coaxial,elliptical waveguide hybrid (FiberFeed,Hybriflex) or fiber cable

Size 1/4, 3/8, 1/2, 5/8, 7/8, 1-1/4, 1-5/8, 2-1/4, 3, 4, 5 in or any other sizes

Number of cables 1 cable

Part Number	Description
HG-14-P	Pre-laced hoisting grip for 1/4” cable
HG-38-P	Pre-laced hoisting grip for 3/8” cable, LMR400, RG8 cable
HG-12-P	Pre-laced hoisting grip for 1/2” cable, LMR 600 cable
HG-58-P	Pre-laced hoisting grip for 5/8” cable
HG-78-P	Pre-laced hoisting grip for 7/8” cable, LMR900 cable
HG-114-P	Pre-laced hoisting grip for 1-1/4” cable
HG-158-P	Pre-laced hoisting grip for 1-5/8” cable
HG-214-P	Pre-laced hoisting grip for 2-1/4” cable
HG-3-P	Pre-laced hoisting grip for 3” cable
HG-4-P	Pre-laced hoisting grip for 4” cable
HG-5-P	Pre-laced hoisting grip for 5” cable
.........	........

  

Customer Care

Manufacturer. HarshMet Corporation

Website www.harshmet.com

Email coldshrinktube@yahoo.com

Lace-up Open Weave Hoisting Grips Manufacturer in China

HarshMet 

Site Installation Solutions

Lace-up Open Weave Hoisting Grips Manufacturer in China

Description

HarshMet Lace-up hoisting grips provide an effective method for hoisting coaxial and elliptical waveguide hybrid (FiberFeed, Hybriflex) or fiber cable into position and can be utilized to provide additional support in location. The lace-up design allows the hoisting grip to be attached even when the run has been connectorized and facilitates easy positioning at 200 (61m) increments on long coax runs.

Characteristic

Application, coaxial support

Made of 304 stainless steel wire or tinned bronze

Sizes 1/4” to 2-1/4”

Open mesh with single eye support

Number of cables, 1 cable

Part Number	Description
HG-14-L	Lace-up hoisting grip for 1/4” cable, min dia 6mm
HG-38-L	Lace-up hoisting grip for 3/8” cable, min dia 8.38mm
HG-12-L	Lace-up hoisting grip for 1/2” cable, min dia 12.7mm
HG-58-L	Lace-up hoisting grip for 5/8” cable, min dia 19mm
HG-78-L	Lace-up hoisting grip for 7/8” cable, min dia 25.4mm
HG-114-L	Lace-up hoisting grip for 1-1/4” cable, min dia 31.75mm
HG-158-L	Lace-up hoisting grip for 1-5/8” cable, min dia 45mm
HG-214-L	Lace-up hoisting grip for 2-1/4” cable, min dia 50mm
HG-3-L	Lace-up hoisting grip for 3” cable
HG-4-L	Lace-up hoisting grip for 4” cable
HG-5-L	Lace-up hoisting grip for 5” cable
.........	......

Pre-laced Close Weave Hoisting Grips

Description

HarshMet pre-laced hoisting grips is type of hoisting grips with closed weave design which simplifies the installation than traditional open weave, lace-up type grips.

The closed weave design allows the hoisting grips slip over a un-terminated end of cable of coaxial cable,elliptical waveguide,hybrid (FiberFeed,Hybriflex) or fiber cable...

The grip securely tightens being pulled,and offer a effective method to hoist the cable in position and can provide support once the cable in place.

Our pre-laced hoisting grips include a support clamp to provide additional support both during and after installation.Characteristic

Made of stainless steel 304 wire

Additional support clamp provide additional support

Pre-laced (close weave) hoisting grips

For cable type Coaxial,elliptical waveguide hybrid (FiberFeed,Hybriflex) or fiber cable

Size 1/4, 3/8, 1/2, 5/8, 7/8, 1-1/4, 1-5/8, 2-1/4, 3, 4, 5 in or any other sizes

Number of cables 1 cable

Part Number	Description
HG-14-P	Pre-laced hoisting grip for 1/4” cable
HG-38-P	Pre-laced hoisting grip for 3/8” cable, LMR400, RG8 cable
HG-12-P	Pre-laced hoisting grip for 1/2” cable, LMR 600 cable
HG-58-P	Pre-laced hoisting grip for 5/8” cable
HG-78-P	Pre-laced hoisting grip for 7/8” cable, LMR900 cable
HG-114-P	Pre-laced hoisting grip for 1-1/4” cable
HG-158-P	Pre-laced hoisting grip for 1-5/8” cable
HG-214-P	Pre-laced hoisting grip for 2-1/4” cable
HG-3-P	Pre-laced hoisting grip for 3” cable
HG-4-P	Pre-laced hoisting grip for 4” cable
HG-5-P	Pre-laced hoisting grip for 5” cable
.........	........

  

Customer Care

Manufacturer. HarshMet Corporation

Website www.harshmet.com

Email coldshrinktube@yahoo.com